Kicker KEY180.4
£239.99
Product highlights:
- 4-channel car amplifier/sound processor
- 45 watts RMS x 4 at 4 ohms
- CTA-2006 compliant
- non-bridgeable — minimum impedance of 4 ohms per channel
- Class D amp technology
- KEY Auto Setup customizes the signal for your vehicle
- calibration mic and activation button included
- pink noise test tones available from Kicker.com
- automatic adjustments include 40-band EQ, 24 dB/octave crossover filters, time alignment
- Bi-Amp mode applies tweeter/woofer crossover settings during KEY Auto Setup
- switchable auto compression
- selectable high-pass filters (off, 60, 80, 120 Hz; 24 dB/octave)
Other Features:
- automatic limiter with clip lights
- preamp and speaker-level inputs
- DC offset sensing turn-on with speaker-level inputs
- Radio-Detect circuit supplies speaker load for receiver to sense
- wiring and hardware not included with amplifier
- 14- or 12-gauge power and ground leads recommended
- fuse rating: 20A x 1
- dimensions: 7-3/8″W x 1-3/4″H x 2-13/16″D
What’s in the box:
Kicker KEY180.4 owner’s manual
- 4-Channel amplifier
- 12″ Harness (power / ground / turn-on / speaker output)
- 12″ Input harness (4-channel RCAs)
- 16″ Loop of 14-gauge red power wire with in-line fuse holder
- 20A ATO fuse (installed in holder)
- Microphone with attached 11.5′ cable (3.5mm plug)
- Rubber microphone holder
- 4 Self-tapping screws (length 1″)
- Two 12″ wire ties
- Owner’s Manual
- Quick Start Guide
